Vector Coatings Products - Polyurea Protective Coatings

PolyureaProtectiveCoatings

Advantages
One No VOC's and Little to No Odor, USDA and Potable Approved

Two Waterproof, Seamless and Resilient, with Low Permeability and Excellent Sustainability

Three Weather Tolerant: Cures at -25°F to >300°F even in High Humidity

Polyurea is a type of elastomer (a polymer with the property of "elasticity") that is derived from the reaction of an isocyanate component and a synthetic resin blend component. Polyurea was developed utilizing traditional polyurethane technology combined with newly developed chemical components and its use is relatively new in the market place. These new chemical compositions display much superior physical properties than its polyurethane precursors, especially being hydrophobic (allowing for curing in the presence of water) and exhibiting much higher temperature resistance.

Furthermore, pure Polyurea coatings are eco-friendly, non-toxic, and contain no VOCs or solvents. In fact, many Polyurea coatings are NSF/ANSI 61 certified for use in potable water storage applications.

Key areas where Polyurea Spray Elastomers can provide effective solutions:

  • Corrosion Resistance on both Concrete and Steel
  • Primary & Secondary Containment
  • Hazardous Materials Containment
  • Abrasion Resistance
  • Roof & Floor Protective Coatings
  • Waterproofing
  • Structural Reinforcement
  • Seismic Reinforcement
  • Tank, water storage and aquifer linings
  • Water Features and Pond Liners
  • Earth Containment & Erosion Resistance
  • Aquariums - many of the worlds aquariums are now using polyurea lining technology


Chemical characteristics of Polyurea provide much faster reaction periods yielding much quicker gel, tack and cure times critical to containment, pipeline, tank and other coating applications, while providing the desirable cold-temperature applicability and unlimited film build-ups. Polyurea also has excellent chemical resistance to many acids and gases, provides for very low permeability ratings and has the ability to achieve UV stable colours.

With proper surface preparation in accordance with SSPC / NACE / ISO standards, an applied Polyurea system will bond to a variety of different substrates, such as metal/steel, wood, concrete, fibreglass, plastic, rubber, and polyurethane foam, and will provide significant protection in waterproofing, abrasion & corrosion control, immersion and lining applications. Furthermore, application formulations can be engineered to meet client specific requirements.

In corrosion, chemical and abrasion environments, empirical evidence shows that Polyurea coatings out perform traditional coating systems used in industrial settings and are used as an alternative to rubber, epoxy, polyurethane, fibreglass and other lining systems.

Polyurea's major benefit is its fast set nature, often less than 20 seconds. It can typically return an area to service many times faster than traditional coatings, allowing the owner to put the facility back in use without days and weeks of revenue losing down-time. Almost no coating can compare to Polyurea when it comes to attainable physical properties including high elongation, abrasive resistance, superior tensile strength, and hard or soft characteristics.






VERSAFLEX FSS 50DM AROMATIC SPRAY POLYUREA

VersaFlex FSS 50DM is a superior metal coating material designed specifically for industrial applications receiving constant or intermittent attack from contained materials, most corrosive substrates and abrasive action. FSS 50DM may be used to coat any properly prepared substrate. FSS 50DM is flexible, accommodating to movement of the substrate, yet strong enough to remain intact under all conditions except major structural dislocations.






VERSAFLEX FSS 45DC AROMATIC SPRAY POLYUREA

VersaFlex FSS 45DC is a superior coating material designed specifically for industrial applications receiving constant or intermittent attack from contained materials, subsurface hydrostatic pressure, most corrosive substances, and abrasive action. FSS 45DC is flexible, accommodating to movement of the substrate, yet strong enough to remain intact under all conditions except major structural dislocations.






VERSAFLEX FSS 45DC-F SPRAY POLYUREA (FAST GEL)

VersaFlex FSS 45DC-F is a superior concrete and metal coating material designed specifically for industrial applications receiving constant or intermittent attack from contained materials, most corrosive substrates and abrasive action. VersaFlex FSS 45DC-F is flexible, accommodating to movement of the substrate, yet strong enough to remain intact under all conditions except major structural dislocations.






VERSAFLEX LC-25 LOCK COAT

VersaFlex LC-25 Lock Coat is a solvent borne Fluoroelastomer, offering outstanding chemical, temperature and permeation resistance. LC-25 is designed to be used as a lock coat after the application of VersaFlex Fast Set Spray materials. LC-25 provides superior adhesion for the VT-40 Finish Coat. LC-25 is a medium viscosity solvent borne coating suitable for most service environments.






VERSAFLEX VT-40 FINISH COAT

VersaFlex VT-40 Finish Coat is a combination of Viton and PTFE, offering outstanding chemical, temperature and permeation resistance. VT-40 Finish Coat is designed to be used in combination with LC-25 Lock Coat and VersaFlexFast Set Spray materials. VersaFlex VT-40 is a heavy solids protective top coating suitable for most service environments and may be applied directly to metal. VersaFlex recommends a minimum of 20 dry mils thickness for containment of harsh chemicals.






VERSAFLEX VF 380 AROMATIC SPRAY POLYUREA (GEOTEXTILE COATING)

VersaFlex VF 380 is a 100% solids elastomeric polyurea developed for applications such as geotextile lining membranes. VF 380 may also be applied to concrete and steel substrates.VF 380 is a volatile free, odorless system applied with 1:1 mix ratio with plural component spray equipment.






VERSAFLEX VF 330 ABRASION RESISTANT SPRAY POLYUREA

VersaFlex VF 330 is a fast set, rapid curing, 100% solids, flexible, two-component abrasion resistant polyurea elastomer spray coating material. VF 330 may be used by itself or in combination with other materials to produce coatings, liners, wearing courses, resilient surfaces on metal and other substrates.






VERSAFLEX PW-1 PRIMER

VersaFlex VF 1 primer is a specially formulated, low solids, single component, evaporative curing primer. PW-1 bonds well to steel and non-ferrous metals.






VERSAFLEX VF 20 MODIFIED URETHANE PRIMER

VersaFlex VF 20 primer may be used with VersaFlex rapid curing polyurea sealants and spray coatings systems. It is designed for use in both interior and exterior priming situations. Allow VF 20 to properly cure prior to topcoating.






VERSAFLEX QUICK MENDER REPAIR POLYMER®

VersaFlex Quick Mender® may be used with all VersaFlex rapid curing polyurea sealants and spray coatings systems. It is designed for use in both interior and exterior concrete repair or parging situations.