VersaFlex VT-40 Finish Coat
One Continuous Operating Temperature from -40°F to +400°F, Excellent Resistance to Most Harsh Chemical Environments
Two 250% Elongation, Very Low Coating Permeability
Three Will Not Harden or Become Brittle, Will Not Shrink After Cure, Excellent Weather & UV Resistance
VersaFlex VT-40 Finish Coat is a combination of Viton and PTFE, offering outstanding chemical, temperature and
permeation resistance. VT-40 Finish Coat is designed to be used in combination with LC-25 Lock Coat and
VersaFlexFast Set Spray materials.
VersaFlex VT-40 is a heavy solids protective top coating suitable for most service
environments and may be applied directly to metal. VersaFlex recommends a minimum of 20 dry mils thickness for
containment of harsh chemicals.
Applications & Uses
VersaFlex VT-40 Finish Coat may be used with all VersaFlex rapid curing polyurea sealants and spray coatings
systems.VT-40 is designed for use in severe duty environments subject to chemical and heat exposures.
Solids Content: 42%
Tensile Strength: >1,000
Taber Abrasion: 0.002
Shore A Hardness: >70
Color: Gray or Yellow