Vector Coatings Products - VersaFlex Quick Mender
VersaFlex Quick Mender

VersaFlex Quick Mender® is a specially formulated polymer rapid repair product. In its basic low viscosity formulation, Quick Mender® will penetrate concrete substrates.

In its highly aggregate loaded high viscosity configuration, Quick Mender® will act as a repair mortar and parging compound.

Applications & Uses

Quick Mender® may be used with all VersaFlex rapid curing polyurea sealants and spray coatings systems.

It is designed for use in both interior and exterior concrete repair or parging situations.


Ultra Low Viscosity in Neat Configuration Will Penetrate Concrete for Permanent Bond
Cures in 30 Minutes for Quick Open to Traffic
Will Cure at -30F. Cure Time Will Be Extended at Lower Temperatures
Mixed with Industrial Quartz Sand will Make a Durable Polymer Concrete
May Be Mixed with Silica Flour, Fumed Silica & Cabosil
Self-Leveling in Thinner Viscosities
May be Feather edged
Minimum Surface Preparation Required
Good Chemical Resistance
Available in Cartridges, Low Viscosity Only
May Be Bulk Mixed for Large Area Repair

Ideal for Applications in:

Repairing Spalls & Cracks in Traffic Areas
Restoring Integrity to Dusted Concrete
Filling Bug-holes in Horizontal Surfaces
Used as a Parging Compound on Horizontal Surfaces to Smooth Concrete & Masonry
Bridge Deck Repairs
Parking Deck Repairs
Below Grade Repairs
Spalled Control Joints
Freezer Applications

Solids Content: 89%
Tensile Strength: 4,500 psi
Shore (D) Hardness: 71 D
Shore A Hardness: 85-92
Elongation: 6%
Working Time: 2-3 min., 5-6 min. with aggregate