Vector Coatings Products - VersaFlex VF 380

VersaFlex VF 380

Advantages
One 100% Solids, 1:1 Mix Ratio by Volume, Rapid Cure, Immediate Return to Service

Two Applied by Plural Component Spray, Odorless, No VOC's

Three Low curing stress shrinkage, Operating Temperatures -40°F to 350°F

Applications-Services
Waterproofing Membranes
Geotextile Coatings
Foam Coatings
Liners
Crude Oil Condensate Tanks
Oil Production Water Containments
Typical ambient waste water and hydrogen sulfide exposures

VersaFlex VF 380 is a 100% solids elastomeric polyurea developed for applications such as geotextile lining membranes.

VF 380 may also be applied to concrete and steel substrates.VF 380 is a volatile free, odorless system applied with 1:1 mix ratio with plural component spray equipment.

Applications & Uses


VersaFlex VF 380 provides less shrinkage with improved elongation characteristics. As a result, VF 380 makes an excellent polyurea for liners, geotextile coatings, and applications where resilience and durability are required.

VF 380 can be applied at a thickness of 10 to 200 mils in a single application.


  • VOC's: Zero
  • Solids Content: 100%
  • Gel Time: 3 -7 seconds
  • Tack Free: 8 -12 seconds
  • Tensile Strength: 6,000 - 6,800 psi
  • Tensile Elongation: 280 - 360%
  • Modulus of Elasticity: 2,200 - 2,800 psi
  • Tear Strength: 330 - 360 lb/in
  • Shore (D) Hardness: 50 D
  • Taber Abrasion: 250 mg