VersaFlex VF 380
One 100% Solids, 1:1 Mix Ratio by Volume, Rapid Cure, Immediate Return to Service
Two Applied by Plural Component Spray, Odorless, No VOC’s
Three Low curing stress shrinkage, Operating Temperatures -40°F to 350°F
Crude Oil Condensate Tanks
Oil Production Water Containments
Typical ambient waste water and hydrogen sulfide exposures
VersaFlex VF 380 is a 100% solids elastomeric polyurea developed for applications such as geotextile lining membranes.
VF 380 may also be applied to concrete and steel substrates.VF 380 is a volatile free, odorless system applied with
1:1 mix ratio with plural component spray equipment.
Applications & Uses
VersaFlex VF 380 provides less shrinkage with improved elongation characteristics. As a result, VF 380 makes an
excellent polyurea for liners, geotextile coatings, and applications where resilience and durability are required.
VF 380 can be applied at a thickness of 10 to 200 mils in a single application.
Solids Content: 100%
Gel Time: 3 -7 seconds
Tack Free: 8 -12 seconds
Tensile Strength: 6,000 – 6,800 psi
Tensile Elongation: 280 – 360%
Modulus of Elasticity: 2,200 – 2,800 psi
Tear Strength: 330 – 360 lb/in
Shore (D) Hardness: 50 D
Taber Abrasion: 250 mg